Ignoramus question about levels-

Im-Quik · Messages: 390 Registration: 08.31.2002

OK- I'm running mics through a Sytek MPX-4A and into the line inputs 5-8 on the 002r. Should I have the inputs on the 002 set to +4 or to -10, and what is the purpose for the settings? The Sytek gain knobs are barely turned up when at +4 and I'm getting mondo levels (not necessarily bad). I'm sure I knew this at one point-- Thanks- PC

lasd · Messages: 298 Registration: 12.03.2002

-10 for that preamp Most consumer gear is -10 Most pro gear is +4

supercharged1.8 · Messages: 534 Registration: 07.15.2002

Thanks for the reply, it's -10 for the Sytek from now on. PC

///MPowered · Messages: 2 Registration: 07.31.2002

The +4 input setting is less sensitive than the -10 setting, so... if the signal seems too hot set to +4, it will REALLY seem too hot with the input set to -10.

CultMaster · Messages: 83 Registration: 02.22.2002

I wondered about that. The -10 means that the input is set to receive the lesser input etc.... Well, I'll just have to see what happens--- PC

My Forum

Ignoramus question about levels-